Friday, January 30, 2009
The pool should not normally be emptied, due to the potential for structural damage.
If emptied, the walls and floor can be assessed for cracked, broken or loose tiles or viny l and these mended or replaced. The surfaces can then be cleaned with a chlorine-based disinfectant. Acid washing may be necessary to get the tiles clean--refer to the manufacturer's advice, as this may damage grouting. In either case, the solution needs to be neutralised then rinsed to waste, before the pool is refilled.
posted by Excitingspas
@ 3:26 PM
permanent link | Post a Comment
|
0 Comments:

